welcome steel is known as one of the leading Inconel 600 reducers manufacturers and suppliers in India and worldwide. We produce the best quality Inconel 600 reducers (eccentric & concentric) with high precision and good performance. We look forward to offer you best prices for Alloy 600 reducer from stock and make to order.

 

Equivalents of Inconel 600 Reducer or Alloy 600 Reducer

 

STANDARD	UNS	WERKSTOFF NR.	EN	BS	GOST	OR	JIS	AFNOR
INCONEL 600	N06600	2.4816	NiCr15Fe	NA 14	XH60BT	ЭИ868	NCF 600	NC15FE11M

 

Chemical Composition of Inconel 600 Reducer

 

Cr	Fe	C	Mn	S	Si	Cu	Ni+Co
14.0-17.0	6.0-10.0	0.15max	1.0max	0.015max	0.5max	0.5max	72.0min

 

Mechanical Properties of Inconel 600 Reducer

 

Form	Tensile Min.	0.2% Yield Min.	Elongation Min.
Pipe/Tube Smls	550 Mpa	240 Mpa	30%

 

Physical Properties of Inconel 600 Reducer

 

DENSITY	8.47 g/cm 3 / 0.306 lb/in 3
MELTING POINT	1354 – 1413 (°C) / 2470 – 2575 (°F)
POISSON’S RATIO	0.29
SPECIFIC HEAT @ 70°F	0.103 Btu/lb•°F
THERMAL CONDUCTIVITY @ 70°F	103 Btu•in/ft2•h•°F
ELECTRICAL RESISTIVITY @ 70°F	620 ohm•circ•mil/ft
CURIE TEMPERATURE	-192°F
MAGNETIC PERMEABILITY	1.010 @ 200 oersted
ANNEALED	983 – 1010 °C
QUENCH	Rapid Air/Water