You will find here Inconel 600 composition, Inconel 600 properties, Inconel 600 density, Inconel 600 melting point, Inconel 600 welding procedure, Inconel 600 equivalent, Inconel 600 uns, Inconel 600 corrosion, Inconel 600 temperature range, Inconel 600 machinability, Inconel 600 price, Inconel 600 specification, Inconel 600 physical properties, Inconel 600 resistivity, Inconel 600 maximum allowable stress, Inconel 600 magnetic properties, Inconel 600 maximum temperature, Inconel 600 weldability, Inconel 600 weight calculator, Inconel 600 designation, Inconel 600 corrosion resistance in seawater, Inconel 600 allowable stress, Inconel 600 annealing temperature, Inconel 600 brinell hardness, Inconel 600 heat resistance, Inconel 600 fatigue properties and lots more.

Inconel 600 Composition

Inconel 600 Melting Point

INCONEL® ALLOY 600

UNS Number N06600

What are the characteristics of Inconel 600?

• Resistant to a wide range of corrosive media.
• Virtually immune to chlorine ion stress corrosion cracking
• Non-magnetic
• Excellent mechanical properties
• High strength and good weldability under a wide range of temperatures

Chemical Composition, %

Ni + Co	Cr	Fe	C	Mn	S	Si	Cu
72.0 min	14.0-17.0	6.0-10.0	.15 max	1.00 max	.015 max	.50 max	.50 max

In what applications is Inconel 600 used?

• Chemical industry
• Aerospace
• Heat treating industry
• Pulp and paper industry
• Food processing
• Nuclear Engineering
• Gas turbine components

Fabrication with Inconel 600

Alloy 600 can be both hot formed and cold formed using typical processes. Hot working should be performed between 1600° F and 2250° F avoiding any work between1200-1600° F because the ductility decreases in this temperature range. Welding Alloy 600 can be achieved via shielded metal-arc welding, TIG, and MIG.

ASTM Specifications

Pipe Smls	Pipe Welded	Tube Smls	Tube Welded	Sheet/Plate	Bar	Forging	Fitting	Wire
B167	B517	B163	B516	B168	B166	B564	B366

Mechanical Properties
Typical room temperature Tensile Properties of Annealed Material

Product Form	Condition	Tensile (ksi)	.2% Yield (ksi)	Elongation (%)	Hardness (HRB)
Rod & Bar	Cold-Drawn	80-100	25-50	35-55	65-85
Rod & Bar	Hot-Finished	80-100	30-50	35-55	65-85
Tube & Pipe	Hot-Finished	75-100	25-50	35*55	-
Tube & Pipe	Cold-Drawn	80-100	25-50	35-55	88 Max
Plate	Hot-Rolled	80-105	30-50	35-55	65-85
Sheet	Cold-Drawn	80-100	30-45	35-55	88 Max