Inconel 600 Bars offer you with the good oxidation and corrosion that resist in very high temperature. These bars are said to be non magnetic and provides you with the great mechanical properties. They have high strength properties, and are heat treatable.

Inconel 600 Bars can be easily being hard-boiled and strengthened through cold work. They are magnetic and resistant in a wide range of corrosive materials.

 

Inconel Alloy 600 Bar Specification

 

Specification : ASTM B 166 / ASME SB 166
Dimensions : ASTM, ASME and API
Size : 5 mm To 500 mm Dia in 100 mm TO 6000 mm Length available with NACE MR 01-75.
Length : 100 mm To 3000 mm Long & Above
Finish : Bright, Polish & Black
Grade : Inconel 600 – UNS N06600
Form : Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wire-mesh, Billet, Ingot, Forging Etc.

Inconel Alloy 600 Bar Chemical Composition

 

Grade	C	Mn	Si	S	Cu	Fe	Ni
Inconel 600	0.15 max	1.0 max	0.5 max	0.015 max	0.5 max	6.0 – 10.0	72.0 min

Alloy 600 Bars Mechanical Properties

 

Element	Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
Inconel 600	1413 °C (2580 °F)	1413 °C (2580 °F)	Psi – 95,000 , MPa – 655	Psi – 45,000 , MPa – 310	40 %

Inconel 600 Bar Equivalent Grades

 

STANDARD	WERKSTOFF NR.	UNS	JIS	BS	GOST	AFNOR	EN
Inconel 600	2.4816	N06600	NCF 600	NA 13	МНЖМц 28-2,5-1,5	NC15FE11M	NiCr15Fe