DIN 1.4876 Ferrochronin® 800HT Pipe Fittings, Incoloy Nicrofer® 3220 Butt weld Pipe Fittings, 800HT Incoloy® Concentric Reducer, Werkstoff No 1.4958 Incoloy® Alloy Butt weld Eccentric Reducer Traders, MSS SP-79 Nickel Alloy DIN 1.4959 End Pipe Cap Suppliers, Alloy MSS-SP-43 Buttweld Swage Nipple, Incoloy® JIS NCF 800HT Stub Ends Exporters.

Incoloy Alloy 800/800H/800HT Butt weld Pipe Fittings Specification

Specifications ASTM B366 / ASME SB366

Dimensions ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, MSS SP-79

Size 1/8” NB TO 48” NB. (Seamless & 100% X-Ray Welded, Fabricated)

Type Seamless / Welded / Fabricated

Bending Radius R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom

Thickness Sch 5s, Sch 10s, Sch 40s, Sch 80s, Sch 160s, Sch XXS

Grade 800 / 800H / 800HT UNS (N08800, N08810, N08811), DIN (1.4876, 1.4958, 1.4959)

Incoloy 800/800H/800HT Butt weld Fittings Equivalent Indian Standard

STANDARD	UNS	WNR.	AFNOR	EN	JIS	BS	GOST	OR
Incoloy 800	N08800	1.4876	Z8NC32-21	X10NiCrAlTi32-20	NCF 800	NA 15	ЭИ670	XH32T
Incoloy 800H	N08810	1.4958	Z8NC32-21	X10NiCrAlTi32-20	NCF 800H	NA 15(H)	ЭИ670	XH32T
Incoloy 800HT	N08811	1.4959	-	X8NiCrAlTi32-21	NCF 800HT	NA 15(HT)	ЭИ670	XH32T

ASTM B366 Incoloy® Alloy 800/800H/800HT Pipe Fittings Chemical Composition

Grade	Ni	Fe	Cr	Cu	Ti	Al	C	Mn	S	Si
Incoloy 800	30.0-35.0	39.5 min	19.0-23.0	.75 max	.15-.60	.15-.60	.1 max	1.5 max	.015 max	1.0 max
Incoloy 800H	30.0-35.0	39.5 min	19.0-23.0	.75 max	.15-.60	.15-.60	.05-.10 max	1.5 max	.015 max	1.0 max
Incoloy 800HT	30.0-35.0	39.5 min	19.0-23.0	.75 max	.25-.60	.85-1.20	.06-.10 max	1.5 max	.015 max	1.0 max

800/800H/800HT Incoloy® ASME SB366 Butt weld Fittings Mechanical Properties

Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
7.94 g/cm3	1350-1400 ℃	Psi - 75,000 , MPa -520	Psi - 30,000 , MPa - 205	30 - 35 %